Copper alloys 铜 合 金 | Cu 107紫铜 | ECu | Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
紫铜，耐大气，海水腐蚀，导电性好。紫铜焊接用，如导电铜排 | ECu |
Cu 207硅青铜 | ECuSi | Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用 | ECuSi |
Cu 227磷青铜 | ECuSnB | Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
锡磷青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用 | ECuSn-C |
Cu 237 | ECuAl | Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用 | ECuAl-A2 |
Aluminum alloys 铝 合 金 | Al 109 | TAl | Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
纯铝，耐蚀性好，但强度不高，纯铝焊接用 | E1100 |
Al 209 | TAlSi | Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金 | E4043 |
Al 309 | TAMn | Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
铝锰，强度高，耐蚀。铝合金焊接用 | E3003 |
Nickel alloys 镍合金 | Ni 102 | ENi-1 | Pure nickel. Welding and surfacing of nickel and nickel to steel.
纯镍，用于镍、镍与钢的焊接与堆焊 | ENi-1 |
Ni 207 | ENiCu-7 | Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
镍铜，用于镍铜、镍铜与钢的焊接与堆焊 | ENiCu-7 |
Copper alloys 铜 合 金 | S 201 紫铜焊丝 | Sn1 Si0.3Mn0.3
Cu Rem. | Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
机械性能好，抗裂性好。紫铜气焊及氩弧焊用 | ERCu |
S 211硅青铜 | Si3 Mn1
Cu Rem. | Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.
机械性能好，铜合金氩弧焊及钢的MIG钎焊用 | ERCuSi-Al |
S 212锡青铜 | Sn5 Cu Rem. | Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。铜合金氩弧焊及钢的堆焊用 | ERCuSn-A |
S 213磷青铜焊丝 | Sn8 Cu Rem. | Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。铜合金氩弧焊及钢的堆焊用 | ERCuSn-C |
S 214铝青铜焊丝 | Al7.5 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用 | ERCuAl-A1 |
S 215铁铝青铜 | Al9 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用 | ERCuAl-A2 |
S 221黄铜焊丝 | Cu60 Sn1 Si0.3
Zn Rem. | Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点约890℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁 | |
S 221F | Cu60 Sn1 Si 0.3
Zn Rem. | S221 welding rod coated with flux.
外涂焊剂的S221焊丝 | |
S 222铁黄铜 | Cu58Sn0.9Si0.1
Fe0.8 Zn Rem. | Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点约880℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁 | RBCuZn-C |
S 222F | Cu58Sn0.9Si0.1
Fe0.8 Zn Rem. | S222 welding rod coated with flux.
外涂焊剂的S222焊丝 | RBCuZn-C |
S 223 | Cu59 Sn0.6
Zn Rem. | Melting point is about 900℃. Braze welding of copper, steel and cast iron.
熔点约900℃。铜、钢、铸铁钎焊用 | RBCuZn-A |
S 224 | Cu62 Si0.5
Zn Rem. | Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点约905℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁 | |
Copper
alloys 铜 合 金 | S 225 | Cu48 Ni10
Zn Rem. | Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys.
熔点约935℃。高强���,钎焊钢、镍及硬质合金用 | RBCuZn-D |
S 225F | Cu48 Ni10
Zn Rem. | S225 welding rod coated with flux.
外涂焊剂的S225焊丝 | RBCuZn-D |
S 226 | Cu60 Sn0.3
Si0.2 Zn Rem. | Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.
熔点约900℃。黄铜气焊用，也可钎焊铜、钢、铸铁 | |
S 227 | Cu58Sn0.9Ni0.5
Si0.1 Fe0.8
Zn Rem. | Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点880℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁 | RBCuZn-B |
S 229 | Cu55 Ni6 Mn4
Zn余 | Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.
熔点约920℃。高强度,钎焊钢、镍及硬质合金用 | |
Aluminum alloys 铝 合 金 | S 301 | Al≥99.5 | Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.
塑性好、耐蚀。纯铝气焊、氩弧焊用 | ER1100 |
S 311 | Si5 Al Rem. | Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
抗裂性好，通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金 | ER4043 |
S 321 | Mn1.3 Al Rem. | Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.
良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用 | |
S 331 | Mg5 Mn0.4
Al Rem. | Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
耐蚀，强度高。铝合金氩弧焊用 | ER5183 |